BODY ARMOR SIZE CHART
Choosing an ill-fitting vest will not only make it awkward to wear but will severely reduce its efficacy. A vest that fits properly will not hinder movement in any way and will allow a full range of movement without sacrificing protection. It is important to make sure when trying on body armor that you can perform a full range of movement, and that you are confident when wearing body armor. A bullet or stab-proof vest should sit just above the belly button and extend no lower than the naval, as it is designed to protect the vital organs; any higher will not properly do this and any lower will hinder movement. Protecting the vital organs is of the utmost importance, as an injury to the lower naval will be serious, but not life-threatening.
Choosing a bullet or stabproof vest should be similar to choosing clothes, and they are sized in similar ways. If you are unsure as to what size would be best for you, a larger size is recommended. This is because body armor is very adjustable thanks to its Velcro straps, and it will be far easier to make a vest fit if it is too big than if it is too small. A vest that is too small will be far less likely to protect properly. Below are the sizes and measurements available:
BODY ARMOR MALE
Before you purchase your vest, we recommend checking your measurements to ensure your vest is the perfect fit for you. You should measure your chest, your waist and the length from just below your sternum to your navel.Size | S | M | L | XL | XXL | 3XL | 4XL |
Chest (inches) | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 |
Waist (inches) | 28-30 | 32-34 | 36-38 | 40-42 | 44-46 | 48-50 | 52-54 |
Size | Short | Regular | Long |
Length (inches)* |
12-13 | 13.5-14 | 14.5-17 |
*Approximate length in inches but may vary based on each individual body type and measurements
BODY ARMOR FEMALE
Before you purchase your vest, we recommend checking your measurements to ensure your vest is the perfect fit for you. You should measure your chest, your waist, and the length from just below your sternum to your navel.Size | S | M | L | XL | XXL | 3XL | 4XL |
Chest (inches) | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 |
Waist (inches) | 28-30 | 32-34 | 36-38 | 40-42 | 44-46 | 48-50 | 52-54 |
Bust (Inches) | 32-34 | 34-38 | 38-42 | 42-46 | 47-51 | 52-56 | 57-61 |
Size | Short | Regular | Long |
Length (inches)* |
12-13 | 13.5-14 | 14.5-17 |
*Approximate length in inches but may vary based on each individual body type and measurements
HELMETS
Before you purchase your helmet, we recommend checking your measurements to ensure your helmet is the perfect fit for you. You should measure your head with a cloth tape measure above your eyebrows and above your ears.Measurement | M | L |
Circumference (inches) | 21.2 - 23.3" | 22.5 - 25.2" |
Remember, helmets should fit closely to the head with no movement

- High-tenacity ballistic aramid fibre
- Thermoplastic resin
- Adjustable internal suspension system
- Sizing from M to L
- Also available in navy, olive, and tan
PROTECTION LEVEL & CERTIFICATIONS

BALLISTIC PROTECTION LEVEL IIIA
Designed to protect against high-velocity handguns up to and including .44 magnum cartridges

TESTED TO NIJ STANDARDS
Tested to the National Institute of Justice's standards to give you the best protection possible
LIGHTWEIGHT PROTECTION
Light as a feather protection
We strive to provide you with outstanding levels of protection at the lowest weight possible. Our helmets are manufactured using cutting-edge technology that combines unmatched strength with feather-light textiles to provide you with the protection you can comfortably wear all day.


BALLISTIC-RATED ARAMID FIBRES
Tenacious protective synthetic fibre
Our hard-wearing ballistic helmets are made from military-grade aramid fibres to protect you in threatening environments. These strong fibres offer a higher level of protection than ever before thanks to their tight weave, which not only absorbs the kinetic energy of projectiles but also stops them from being to pass through the fibres.
FREQUENTLY ASKED QUESTIONS
Measurement | M | L |
Circumference (inches) | 21.2 - 23.2" | 22.5 - 25.2" |
Before you purchase your helmet, we recommend checking your measurements to ensure your helmet is the perfect fit for you. You should measure your head with a cloth tape measure above your eyebrows and above your ears.
Remember, helmets should fit closely to the head with no movement. If in doubt, we recommend you buy a larger size.

How to wash a helmet
- Make a mixture of cool water and mild detergent and use a damp sponge to clean the helmet.
- With a damp sponge, remove any excess soap.
- Dry the helmet with a cloth.
- Air dry the helmet in a shady area or indoors if some moisture remains.

- Keep your head up straight.
- Wrap a cloth tape measure around the head approximately 1cm above the ear and 2cm above the eyebrows.
- Keep the tape measure horizontal.
- Record the widest forehead circumference measurement.
- Store helmets away from direct sunlight and UV-light.
- Store helmets away from sources of moisture.
- Store helmets away from high temperatures.
- Allow helmets to air-dry after each usage.
- Check the exterior for signs of wear or damage.
- Use a flat-head screwdriver to check that the chinstrap screws are tight.
- Ensure there is no damage to the chinstrap and check that the fastener latches and releases.
- Check the inner pads for rips or tears
Products Reviews


